Effects of calcium silicate cements on neuronal conductivity.

Objectives: This study evaluated alterations in neuronal conductivity related to calcium silicate cements (CSCs) by investigating compound action potentials (cAPs) in rat sciatic nerves. Materials and Methods: Sciatic nerves were placed in a Tyrode bath and cAPs were recorded before, during, and after the application of test materials for 60-minute control, application, and recovery measurements, respectively. Freshly prepared ProRoot MTA, MTA Angelus, Biodentine, Endosequence RRM-Putty, BioAggregate, and RetroMTA were directly applied onto the nerves. Biopac LabPro version 3.7 was used to record and analyze cAPs. The data were statistically analyzed. Results: None of the CSCs totally blocked cAPs. RetroMTA, Biodentine, and MTA Angelus caused no significant alteration in cAPs (p > 0.05). Significantly lower cAPs were observed in recovery measurements for BioAggregate than in the control condition (p < 0.05). ProRoot MTA significantly but transiently reduced cAPs in the application period compared to the control period (p < 0.05). Endosequence RRM-Putty significantly reduced cAPs. Conclusions: Various CSCs may alter cAPs to some extent, but none of the CSCs irreversibly blocked them. The usage of fast-setting CSCs during apexification or regeneration of immature teeth seems safer than slow-setting CSCs due to their more favorable neuronal effects.

Patterns of Post-Endodontic Restoration: A Nationwide Survey of Dentists in Turkey.

Developments in materials and techniques, geographical locations, age, specialty, and affiliations of dental practitioners affect the preference of post-endodontic restoration. Thus, this survey aimed to evaluate the trends of dentists in Turkey in terms of post-endodontic restorations. An anonymous survey containing 10 questions regarding demographics, post-endodontic restoration patterns, and factors affecting restoration selection was electronically delivered to the dentists registered in the database of the Turkish Dental Association. The data were analyzed using by a chi-square test and ordinal logistic regression analysis. A total of 1093 surveys from 20,564 participants were collected with a response rate of 5.3%. Half of the participants (52%) preferred composite resins for post-endodontic restorations. Usage of posts was less prevalent amongst prosthodontists and dentists with clinical experience of more than 20 years compared to endodontists (p < 0.001) and dentists with clinical experience of less than 5 years (p = 0.004). More than half of the participants (56%) utilized fiber posts. Composite resins and fiber posts were the most common preferences in post-endodontic restoration. Endodontists had a higher tendency to use posts than prosthodontists and general dental practitioners.

Fracture Resistance of Teeth with Simulated Perforating Internal Resorption Cavities Repaired with Different Calcium Silicate-based Cements and Backfilling Materials.

INTRODUCTION: This study assessed the fracture resistance (FR) of teeth with simulated perforating internal resorption cavities repaired with different calcium silicate-based cements (CSCs) and backfilling materials. METHODS: Ninety-six mandibular premolar teeth were used. Twelve of the teeth were assigned as negative control group. Remaining roots were instrumented with rotary files, and standardized internal resorption cavities were prepared on the middle half of roots with burs. Twelve of the samples were not further interfered and were assigned as a positive control group. The apical 4 mm of the remaining 72 root canals was obturated with single-cone technique and divided into 6 groups according to CSCs used for repairing of cavities and backfilling materials as follows: MTA + MTA, MTA + gutta-percha/sealer, Biodentine + Biodentine, Biodentine + gutta-percha/sealer, MTA Plus + MTA Plus, and MTA Plus + gutta-percha/sealer. Specimens were embedded in acrylic resin and then subjected to fracture testing. The forces when the fracture occurred were analyzed with analysis of variance and Bonferroni tests at P = .05. RESULTS: No significant difference was found among CSCs irrespective of backfilling materials (P > .05). Groups MTA + gutta-percha/sealer, Biodentine + gutta-percha/sealer, and MTA Plus + gutta-percha/sealer showed significantly lower FR compared with groups MTA + MTA, Biodentine + Biodentine, and MTA Plus + MTA Plus, respectively (P < .05). The highest FR was observed in group Biodentine + Biodentine, and the lowest was in group MTA Plus + gutta-percha/sealer. FR of positive control group was statistically lower than groups completely filled with CSCs (P < .05), whereas FR of negative control group was statistically higher than the groups combined with gutta-percha and sealer (P < .05). CONCLUSIONS: The backfilling with CSCs may be a preferable material rather than gutta-percha/sealer combination for the roots with perforated internal resorptions.

Vertical root fracture resistance of simulated immature permanent teeth filled with MTA using different vehicles.

BACKGROUND: The aim of the study is to evaluate the resistance vertical root fracture (VRF) of mineral trioxide aggregate (MTA) filled-immature permanent roots by using three different vehicles. MATERIAL AND METHODS: Forty-extracted human single-rooted mandibular premolars were selected and the root length was standardized to the length of 9 mm. For simulation of immature tooth apices, peeso reamers were introduced into the root canals and the prepared roots were assigned into three experimental groups according the used vehicle (distilled water-DW, prophylene glycol-PG, chlorhexidine-CHX) and control group (n=10). To simulate a periodontal membrane, the apical 7 mm of all roots was covered with wax to obtain a 0.2- to 0.3-mm-thick layer before embedding the roots into acrylic cylinders. A vertical force was applied (1mm/min) using a universal testing machine and the maximum load (F-max) that fracture occurred and the fracture mode (splint or comminuted) was recorded. Data were presented as mean and standard deviations. Statistical analysis was performed using Kruskal-Wallis, Mann-Whitney U Test was used for multiple comparisons. RESULTS: There were significant differences between fracture strength of experimental groups with that of control group (p<0.05). However, no statistically significant differences were found amongst the fracture strength values of the experimental groups (p>0.05). In all groups, split fracture was the most common fracture mode. CONCLUSIONS: MTA increases resistance of immature permanent teeth to VRF. Based on the results of this study, it can be concluded that mixing MTA with CHX or PG as the vehicle do not alter VRF resistance of simulated immature permanent roots. Key words:Immature teeth, MTA, vehicle, vertical root fracture.

Effect of a Low Surface Tension Vehicle on the Dentinal Tubule Penetration of Calcium Hydroxide and Triple Antibiotic Paste.

INTRODUCTION: The purpose of this study was to evaluate dentinal tubule penetration (DTP) of calcium hydroxide (CH) and triple antibiotic paste (TAP) when performed with distilled water (DW) or a low surface tension liquid (ie, propylene glycol [PG]). METHODS: Root apices of 40 single-rooted premolars were removed to obtain 14-mm roots in length. Root canals were enlarged to simulate immature teeth. After smear layer removal, the roots were randomly divided into 4 groups (n = 10) according to the root canal medicaments and the vehicles used: group 1:TAP + DW, group 2: TAP + PG, group 3: CH + DW, and group 4:CH + PG. Root canal medicaments were labeled with 0.1% rhodamine and applied into the canals using a Lentulo spiral. Specimens were molded into acrylic blocks, and 1-mm-thick sections were obtained from the middle third of each root. Specimens were mounted onto glass slides and scanned under a confocal laser scanning microscope. DTP depth, percentage, and area were measured using imaging software. Kruskal-Wallis and Mann-Whitney U tests were used for statistical analysis. The level of significance was set at P < .05. RESULTS: No significant difference was found among the experimental groups in terms of both percentage and depth of DTP (P > .05). CH had a lower penetration area compared with TAP regardless of the vehicle used (P < .05). CONCLUSIONS: A low surface tension vehicle did not alter the penetration of CH and TAP.

Push-out bond strength and dentinal tubule penetration of different root canal sealers used with coated core materials.

OBJECTIVES: The aim of this study was to compare the push-out bond strength and dentinal tubule penetration of root canal sealers used with coated core materials and conventional gutta-percha. MATERIALS AND METHODS: A total of 72 single-rooted human mandibular incisors were instrumented with NiTi rotary files with irrigation of 2.5% NaOCl. The smear layer was removed with 17% ethylenediaminetetraacetic acid (EDTA). Specimens were assigned into four groups according to the obturation system: Group 1, EndoRez (Ultradent Product Inc.); Group 2, Activ GP (Brasseler); Group 3, SmartSeal (DFRP Ltd. Villa Farm); Group 4, AH 26 (Dentsply de Trey)/gutta-percha (GP). For push-out bond strength measurement, two horizontal slices were obtained from each specimen (n = 20). To compare dentinal tubule penetration, remaining 32 roots assigned to 4 groups as above were obturated with 0.1% Rhodamine B labeled sealers. One horizontal slice was obtained from the middle third of each specimen (n = 8) and scanned under confocal laser scanning electron microscope. Tubule penetration area, depth, and percentage were measured. Kruskall-Wallis test was used for statistical analysis. RESULTS: EndoRez showed significantly lower push-out bond strength than the others (p < 0.05). No significant difference was found amongst the groups in terms of percentage of sealer penetration. SmartSeal showed the least penetration than the others (p < 0.05). CONCLUSIONS: The bond strength and sealer penetration of resin-and glass ionomer-based sealers used with coated core was not superior to resin-based sealer used with conventional GP. Dentinal tubule penetration has limited effect on bond strength. The use of conventional GP with sealer seems to be sufficient in terms of push-out bond strength.